An important part of ensuring the quality of thermal treatment is the uniformity of the forging temperature temperature. For most low -alloy steel quenching. The temperature accuracy of the Antidization can be controlled within the range of ± 15 ° C. For thermal treatment of high -intensity aluminum

Compared with ordinary mode forging, the main advantages of precision die forging are: less than mechanical processing, even zero; raw material savings; high labor productivity: low production cost; high dimensional precision mold forging, dimensional tolerance The size tolerance of ordinary die for

The preparation of aluminum alloy forgings before forging includes the selection of raw materials, calculation, blanking, heating, deformation, design of equipment and molds. Before forging, the lubrication method and lubricant should also be selected.Forging materials have a wide range of surfaces,

First, the characteristics of fine forging1. Greatly reduce the cost of product parts. The machining allowance of forgings is small, the public service is small, and the surface roughness value is small. Machining can partially or completely replace parts, save data and machining time, and improve l

Penetration Testing After the surface of the test piece is coated with a penetrant containing fluorescent dyes or coloring dyes, under the action of capillary tubes, after a certain period of penetration, the penetrant can penetrate into the surface opening defects; after removing the excess penetra

​Ultra-high-strength aluminum alloys generally refer to aluminum alloys with a yield strength of more than 500 MPa, and the common ones are 7XXX series super-hard aluminum.

Processing characteristics of 7075 aluminum pipe 7075 aluminum is called ultra-high strength aluminum alloy. The yield strength of the alloy is close to the tensile strength, the yield ratio is high, and the specific strength is also high, but the plasticity and high temperature strength are relativ

High-strength duralumin 2A12 aluminum forgings2A12 aluminum alloy is a kind of high-strength hard aluminum, which can be strengthened by heat treatment. It has medium plasticity under annealing, just quenching and hot state. 2A12 aluminum alloy has good spot welding weldability. Tendency; 2A12 alumi

According to preliminary statistics, in 1985, aluminum forgings accounted for 0.5% (18,000 tons) of the world's total forging production, and in 2008 it rose to about 18%. At present, the world's consumption of forgings is about 4.5 million tons/year, of which aluminum forgings are about 800,000 ton

Kunshan Southwest Aluminum Forging Co., Ltd. in order to maximize the savings of production and transportation costs of customers, to meet customer needs. The quality policy of "quality-oriented, reputation-oriented, excellence, continuous improvement" has consistently provided customers with produc

Cooling for forging is complex and difficult to control. The formulation of the cooling process is much more important and complex than the small parts. The key to determining the mechanical properties after forging and tempering is the nature and dispersion of the structure obtained after cooling.I

Forging materials are mainly carbon steel and alloy steel with different compositions, followed by aluminum, magnesium, copper, titanium, etc. and their alloys. The raw state of the material is bar, ingot, metal powder and liquid metal.